Microbiology / Aquaculture

EcoClean™ AM

Microorganisms treat ammonia and toxic gases

EcoClean ™ AM is a blend of naturally occurring, isolated and selected bacteria to remove Ammonia and odor-causing organic contaminants from wastewater sources and bio-ponds.

microbiology-aquaculture-2
microbiology-aquaculture-3
microbiology-aquaculture-1

EcoClean™ AM is a blend of 8 species of facultative aerobic bacteria, which makes the product effective on a wide range of substrates and environmental conditions.

The bacteria in EcoClean™ AM are completely active on saprophytic and non-living substrates. Application of EcoClean™ AM under aerobic conditions will result in a combined reduction of BOD, COD and odours resulting from anaerobic bacterial activity. By providing a more efficient pollutant reduction process, EcoClean™ AM supports a significant reduction in dredging and chemical use for treatment.

Product benefits:
  • Breaks down NH 4 into nitrogen and hydrogen
  • Bacteria consume nitrogen and use it for their growth activities.
  • Hydrogen is oxidized and becomes part of the water molecule.
  • EcoClean™ AM breaks down NH4 into its core elements, effectively reducing odors and reducing ammonia concentrations in wastewater to acceptable levels.
  • Ideal for use in plants with ammonia rich emissions and landfill leachate.
FOR AQUACULTURE PONDS ENVIRONMENT:

During the farming process, shrimp can only absorb about 30% of the protein in the food, the rest will fall to the bottom and accumulate in the mud layer, creating an extremely large amount of pollution. The protein conversion process takes place through many steps, with many groups of microorganisms participating, but the process of forming toxic gas NH 3 is faster than the rate of converting NH 3 into non-toxic substances, leading to the accumulation of NH 3 and increasing NO 2 .

EcoClean™ AM is a probiotic specially formulated to treat toxic gases and stabilize the pond environment.

Typical product properties :
  • Form: Powder
  • White
  • Odor: None
  • Expiry date: 2 years
  • Carrier: Mineral salt
  • Bacterial density: 1-5 x 10 9 CFU/gram
Operating conditions
  • Effective pH: 5.5-8.5
  • Effective temperature: 20-45°C (68-113°F)
Packaging:

EcoClean™ AM is packaged in 100 gram packets.

Application industry:
  • Industrial
  • Latex processing
  • Food and beverage
  • Grease traps and drainage system maintenance
  • Clean floor surface
  • Deodorize RV, portable toilet, septic tank
  • Pets and farms
  • Compost accelerator
  • Food processing wastewater, meat processing
  • Wastewater contains many surfactants and soaps.
Instructions for use:

Product dosage:

a. Periodic treatment, bottom treatment:

  • 100g for 1,000m3 , apply periodically every 5 days

b. Emergency treatment when toxic gas breaks out

  • 100g for 1,000m3 , apply once every 2-3 days depending on the level of toxic gas generated.

Making:

  • Mix 100-200g in 20 liters of water, add 2kg of molasses, aerate continuously for 2 hours, then spread evenly over the pond surface.
  • Should be used in sunny weather, when the pond has the most oxygen.
  • Run the water fan before and after using the product
EcoClean™ AM Advantages :
  • Converts toxic gases quickly after 2 to 3 times of microorganism spraying, especially NH 3 , no need to use Yucca and Zeolite
  • Extremely powerful organic sludge reformer, helps control toxic gases, prevents toxic gases from arising when used from the beginning to the end of the farming season.
  • Use EcoClean™ AM instead of Yucca and Zeolite to treat NH 3 throughout the crop

*Recommended: Use EcoClean™ AM from the beginning of the season to control toxic gases.

Process of handling toxic gas:

In case of toxic gas generation, follow these steps to reduce toxic gas, especially NO2 gas .

  • Change about 30% of the water, can change slowly to avoid shocking the shrimp.
  • Reduce 30-50% of food to avoid excess food falling to the bottom of the pond, causing more toxic gases.
  • Run the fan 24/7 to create oxygen, helping to speed up the Nitrification process (Nitro Bacter)
  • Apply EcoClean  AM microorganisms at a dosage of 100g/1,000m3 , apply once every 2 days, apply continuously 4 times.
  • Use EcoClean AM until harvest day to avoid further toxic gas generation.

In addition, during the process of treating toxic gas, adding molasses mixed with water and increasing the amount of Vitamin C has the effect of promoting the conversion process of NO 2 → NO 3.

Note: Nitrification (release of NO 2 gas ) may be slow for one of the following reasons:

  • The pond does not provide enough oxygen for Nitro Bacter to grow and convert NO 2 → NO 3
  • Not using molasses in the microbial process causes Nitro Bacter to develop suboptimally, leading to poor conversion efficiency.
  • Too much mud at the bottom of the pond causes a lot of toxic gas to accumulate, leading to insufficient metabolism to release all the toxic gas generated daily.

*Recommended: Use EcoClean  AM right from the beginning of the crop to control and decompose the sludge at the bottom of the pond, avoid waiting until toxic gases arise to treat.

Storage and handling:
  • Storage: Store in a cool, dry place.
  • Handling: Wash hands with soap and warm water after use.

Microbiology - Aquaculture

EcoClean™ AM - Microorganisms for Treating Ammonia and Toxic Gases

EcoClean ™ AM is a blend of naturally occurring, isolated and selected bacteria to remove Ammonia and odor-causing organic contaminants from wastewater sources and bio-ponds.

Product suggestions

Shopping Cart
Scroll to Top